Air-Cooled Hysteresis Brakes

You are here: Home

Air-Cooled Hysteresis Brakes

The design is based on the foundation of standard hysteresis brake with the addition of an air cooled device. As the brake’s temperature rises with the time of operation, this brake is perfect for long time continuous operation under high slipping power. It can be used as loading for motor tests.

Specifications:

The Air-Cooled Hysteresis Brakes Without Pedestal
Model	Minmum torque at rated current		Rated current	Voltage	Resistance at 25℃±10%	Kinetic power				External inertia	Max speed	Weight
						With air supply(Kpa)		Without air supply
						5 min	Contin uous	5 min	Contin uous
	kg·cm	N.m	mA	VDC	Ω	watts	watts	watts	watts	kg·cm_²	rpm	kg
AHB-202	2	0.2	200	24	120	200	200	75	20	6.8x10_^-2	25000	0.5
AHB-502	5	0.5	393	24	61	400	400	120	35	1.8x10_^-1	25000	1.35
AHB-103	10	1	250	24	96	800	800	320	80	1.1x10_⁰	25000	1.8
AHB-203	20	2	315	24	76	1000	800	460	115	3.2x10_⁰	25000	3.5
AHB-303	30	3	750	24	32	1300	1300	680	165	7.3x10_⁰	20000	5.2

The Air-Cooled Hysteresis Brakes With Pedestal
Model	Minmum torque at rated current	Rated current	Voltage	Resistance at 25℃±10%	Kinetic power				External inertia	Max speed	Weight
					With air supply(Kpa)		Without air supply
					5 min		5 min
	N.m	mA	VDC	Ω	watts	watts	watts	watts	kg·cm_²	rpm	kg
AHB-1	1	400	24	60	1200	1200	320	80	8.1x10_^-1	25000	2.1
AHB-1.5	2	315	24	76	1300	1300	460	115	2.7x10_⁰	25000	3.8
AHB-3	3	750	24	32	1800	1800	680	165	6.8x10_⁰	20000	5.7
AHB-5	5	750	24	32	2500	2300	1000	200	1.31x10_¹	15000	10
AHB-6	6	1500	24	16	3000	2800	1400	225	1.38x10_^-1	20000	11
AHB-10	10	1500	24	16	3800	3500	1800	280	2.62x10_¹	12000	20.6
AHB-11	1.1	1200	24	20	2800	2500	1200	350	5.60x10_¹	10000	20.2
AHB-12	12	1200	24	20	2800	2500	1200	350	5.60x10_¹	12000	23
AHB-24	24	2400	24	10	5300	3000	4000	450	1.12x10²	10000	46

AHB Series Selection Guide / Datasheet

Remarks:
With compressed air – Air cooling device is not included. Purified, clean and dry air is required